rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 490 ONLINE 44 EVENTS SEARCH REGISTER  START HERE
 
1 page1534 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
e-Align T-REX 450-500-600 > CRAP flybar rod parts!!!!!
 
 
nilste
Senior Heliman
Location: Oslo, Norway

Is this yet an example of poor quality checking from Align, or have I received counterfeit parts?
The two flybar rods in the bag with the larger label does not fit the bearings. The diam. of the rods are too large. Have anyone else experienced this?

05-27-2006 Over year old.
 
 
JeepRubicon2k3
Senior Heliman
Location: Mass

I think one is for the metel see-saw and the other is for the plastic.

--T-Rex 450XL CF, JGF 450TH,Jazz,GY401,TP2100X2--
05-27-2006 Over year old.
HOMEPAGE  
 
 
nilste
Senior Heliman
Location: Oslo, Norway

Okey? But they have the same partnbr.?
05-27-2006 Over year old.
 
 
str8den
Senior Heliman
Location: East U.K

i had the same prob with my XL, the flybar rod seemeed a fraction too big to fit the bearings. It did eventually push through but was tight; it scaped some of the 'back' finish off the rod! Then another set of rods slid in without any trouble - QC is the issue i think.
05-27-2006 Over year old.
 
 
Pepe Toño
Senior Heliman
Location: Mexico, DF - MEXICO

The same problem but.....................

I have the same problem, is a practices and simple solution

http://www.runryder.com/helicopter/t232635p1/

Un saludo desde Mexico
05-27-2006 Over year old.
HOMEPAGE  
 
 
martinic
Veteran
Location: NB, Canada

If you want, you can mount the flybar in a drill and turn it to size using sandpaper (600 grit to finish, 300 for rough sizing). It's a bit of a pain, but it works.
05-27-2006 Over year old.
 
 
karl58
Senior Heliman
Location: Scottsdale, AZ

INSIDE SECRET:

You're not supposed to say "It's Crap" on here... you're supposed to make due with whatever you get, even if you have to make the part from scratch using your part as a concept pattern, then sing the praises of the heli company in the hopes that they will 'like' you and start sending you free stuff.

Just ask koko

"I can't see or hear idiots"
05-27-2006 Over year old.
 
 
str8den
Senior Heliman
Location: East U.K

Yeah; all my flybars are different, but they're great!!!
what do i get for that?
you want my tongue a darker shade of brown??
05-27-2006 Over year old.
 
 
Grant H
Key Veteran
Location: Maryland

Some where between the V2 and the XL and SE, Align changed up their flybars.

There are 2 versions out there. The older version is larger and requries a very light sanding to be inserted into the SE bearings of the flybar holder. The newer vesion should fit well, without any need for sanding.
05-27-2006 Over year old.
HOMEPAGE  
 
 
Kill_A._Byte
Senior Heliman
Location: West New York

Quote 
Okey? But they have the same partnbr.?
They dont have the same part number. One is HS10061 and the other is the HS10061T
05-27-2006 Over year old.
 
 
nilste
Senior Heliman
Location: Oslo, Norway

Kill_A._Byte your wrong.

Take a look again. Both bags have partnbr. HS1006T. Why Align have the same partnbr. on rods that surely are different is beyond me.
Or, maybe they don't know that there are a diam. difference?

05-27-2006 Over year old.
 
 
Kill_A._Byte
Senior Heliman
Location: West New York

OOOpss
I was looking at the tags on the upper right of the pack.Where it says "Model No." with the actual Align model number next to it, not the bar code.
05-27-2006 Over year old.
 
 
1 page1534 viewsPOST REPLY
MRC/Altech Marketing USA . RCHover . RC-Direct

.
.
e-Align T-REX 450-500-600 > CRAP flybar rod parts!!!!!
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, July 19 - 6:04 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie