carcrasher
Key Veteran
Location: east coast
| P,E,A. Pitch, Elevator, aileron. that's the arrangment in all ccpm helis. the pitch servo is on the left of the heli, elevator is the one on the top of the pitch servo, then the aileron is on the right side of the heli. you want the swash setting for 120 degree ccpm. I don't know what it is on he 10x. maybe someone with a JR radio can chime in. install the servos and check to make sure that they are going in the right direction, when you go full collective all 3 servos go up(have the servo wheels installed it makes it easier). if one or more of them doesn't go up then reverse the servo until all 3 move in the same direction when full collective is applied. give it full elevator, either foward or back and make sure the front(elevator servo) goes down for foward or up for back and that the two other servos go oppisite of the elevator. when the elevator servo goes down(foward) then the other two servos go up and vise versa. then do the aileron. this time the elevator servo shouldn't move only the pitch and aileron. if when giving it full elevator or aileron it goes oppisite of what you wanted then you can fix that in the swash menu by either using + or - values for your swash percentages. hope this helps. |
