RunRyder - fin vib

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 453 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

507 views

POST REPLY

XHELI.COM	.	Autography FlightPower	.	Advantage Hobby
	.		.

Bergen R/C Helicopters > fin vib

KELLY STEED
Heliman
Location: Fort McMurray canada

I'm getting vibs on the top half of my tail fin only,stock white thin tail fin,eb with 3d 26,115 tail blades 810 mains,bottom of fin rock solid.heli is used for lifting camra mount only.no other vibs skids are solid.is this still some fine tuning with 26 or balancing proplem some where.thanks for any help out there.

05-10-2006 Over year old.

Chris Bergen
Key Veteran
Location: location

The top half only? Not anything on the bottom half?

Odd...

Check the tail blades for balance and tracking, also check the tail hub, possibly bent from either one of the two previous ooopss.

Is it any at all possible this little vibe was there previously and may have contributed to the other 2 oopss?

Chris Bergen

05-10-2006 Over year old.

KELLY STEED
Heliman
Location: Fort McMurray canada

boy your fast,you might be right i had to set my tracking again.that hub is hard to check. will just order a new one in the morring.thanks for all the help you been giving,and your fast to.thanks for keeping me in the air.

05-10-2006 Over year old.

Malorie
Elite Veteran
Location: Paw squared, MI

You can easily check the hub by removing it from the output shaft with the grips attached. The hold the grips and turn the hub in the grips. You'll know if it's bent.

Malorie

Life's a journey, NOT a destination.

05-10-2006 Over year old.

Autoeject
Key Veteran
Location: Ashtabula, OH, USA

Good tip Malorie!

Mark Webber
wai-rc.com
Spartan RC Distributor
Outrage Helicopters

05-10-2006 Over year old.

HOMEPAGE

1 page

507 views

POST REPLY

Revolution Models	.	CarbonXtreme	.	Midland Helicopters
	.		.

Bergen R/C Helicopters > fin vib

PRINT TOPIC

Advertisers

Subscribe to This Topic