rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 813 ONLINE 68 EVENTS SEARCH REGISTER  START HERE
 
1 page1268 viewsPOST REPLY
Autography FlightPower . HeliHobby . HeliProz

.
.
e-Mikado Logo 400 500 600 > A few logo 10 deluxe questions
 
 
rcmarty
Veteran
Location: Penticton , B.C. CANADA

I think i'm going to go with the logo deluxe kit (over the swift).

I've read alot about both.

The logo 10 deluxe kit for $229 on the net

- This has the thrust bearing upgrade ?
- Will this swing 550mm blades stock ?
- 20bb kit , does that include the see saw ?

Suggestions or recommendations on :

- alum motor mount
- lighter paddles


Shopping list so far :

- logo 10
- neu 1910
- cc 45hv
- 3.5A medusa bec
- gy240 or 401 / 9253
- V28 emoli 7 cell pack

Let me know of you have a link to a video of this setup or as close as possible. Any other suggestions welcome.

MArtin

What goes up will come down.... one way or another !
05-07-2006 Over year old.
HOMEPAGE  
 
 
BoneDoc
Senior Heliman
Location: San Antonio, TX

1. Yes
2. No, you need extended boom kit
3. No, bushings on all the head assy except for the grip, 2BB + Thrust bearing.

**If you ain't crashing, you ain't flying hard enough**
05-07-2006 Over year old.
HOMEPAGE  
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

Here is the upgrades I have ordered for mine:

- 4 ball bearings for the seesaw.
- Lighter paddles #2359
- Dual boom supports #721 and #2441
- Alu hex bolts for the frame #2371
- Tail pitch plate with hinges #3030
- I also have a spare L10 3D control bridge that I'll use.

I also considered the alu motor plate, but it is too expensive. If I like the way it flies on 7S emolis I might get a complete novaman frameset for it instead?

My setup will basically be the same as yours, but I'll be using a Hacker C50 11Xl instead. I havent built it yet so I dont know how well it will perform



What comes around goes around.
05-07-2006 Over year old.
HOMEPAGE  
 
 
rcmarty
Veteran
Location: Penticton , B.C. CANADA

Got a chance to looking the logo's some more.

I'm giving some consideration to the logo 3d also.

The logo.de website doesn't say much on the deluxe kit but says the 2006 3d kit has several upgrades :

- frame brace
- 4mm blade bolts
- SS links and balls
- carbon blades
- better belt
- battery support

I know the deluxe doesn't come with carbon blades and the full alum swash but what about the other stuff ? 4mm bolt mains, frame brace , better belt ?

MArtin

What goes up will come down.... one way or another !
05-08-2006 Over year old.
HOMEPAGE  
 
 
ozace
Key Veteran
Location: melbourne, australia

i am not sure you can fit the V28's in a Logo, it is worth a check before you buy it

we can never have too many, can we ?
05-08-2006 Over year old.
 
 
rcmarty
Veteran
Location: Penticton , B.C. CANADA

Good point ozace .. i just assumed.

Are you talking about in the original configuration or even if the pack is reconfigured ?


more research

Martin

What goes up will come down.... one way or another !
05-08-2006 Over year old.
HOMEPAGE  
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

Just noticed that the spindle that came with the deluxe is made in aluminum. Might be better to get the steel one...



What comes around goes around.
05-08-2006 Over year old.
HOMEPAGE  
 
 
BoneDoc
Senior Heliman
Location: San Antonio, TX

My 10 Deluxe has all of that except for the carbon blades. I'm not sure what SS links are?? And I don't know what a "better" belt would be, but the one I got looks pretty good .

**If you ain't crashing, you ain't flying hard enough**
05-08-2006 Over year old.
HOMEPAGE  
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

SS - stainless steel rods. The rods in the deluxe kit are threaded all the way - the rods that came with the 3D kit seems harder and are threaded only in the ends



What comes around goes around.
05-09-2006 Over year old.
HOMEPAGE  
 
 
1 page1268 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . RC-Direct

.
.
e-Mikado Logo 400 500 600 > A few logo 10 deluxe questions
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, May 20 - 7:15 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie