rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 280 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page585 viewsPOST REPLY
Century Helicopter . MTA Hobbies . Model Rectifier Corp

.
.
e-JR Voyager E > Voyager E canopy
 
 
Chads
Heliman
Location: Depew, NY USA

I was wondering if I could get a little help from you voyager guys? I like the look of the voyager canopy and wanted to put one on a different heli. Could someone give me some the dimensions of the stock canopy or even the aftermarket one from FX Aeromodels. Maybe basic width and height.

I would greatly appreciate any help...

Chads
05-06-2006 Over year old.
 
 
oldboldpilot
Key Veteran
Location: Southern California

Looking into the canopy from the rear, the cross-section is rectangular. The inside width is 3 inches. The inside height is 6-3/4 inches. This does not include the chin bump; it protrudes below the floor.

Front mounting holes are 2-3/4 above the inside floor. Rear mounting holes are 1 inch below the inside roof (3 inches above the front holes).

The front and rear holes are 7 inches apart.

The forward mounting holes are 4-1/2 inches aft of the nose.

Helis are Man's Defiance of the Laws of Nature - OCHC
05-07-2006 Over year old.
 
 
Chads
Heliman
Location: Depew, NY USA

Thanks oldboldpilot, the dimensions you provided helped me out. It looks like it will work.

Chads
05-08-2006 Over year old.
 
 
1 page585 viewsPOST REPLY
RCHover . RC-Direct . HeliDirect

.
.
e-JR Voyager E > Voyager E canopy
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 22 - 8:31 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie