jetranger
Veteran
Location: PERHAM M.E.
| Last year I picked up a half built Intrepid gasser for a fast $100 The person I know just gave up on it. Any way, it's missing a few parts, whole tail end, which is no problem. The heli as far as I can tell is 5-6 years old. It came with a 30 1/2 inch boom--21mm OD--19+ ID and two 8mm holes at one end. Fits boom holders but not tight. A 30 inch by 5/16 orange alu drive tube, with a 1 inch long center bearing, bearing is at one end of tube. Fits tube but not tight, can push through with no pressure. Wire support for a drive wire that looks like old GMP 18 1/2 long brass tube with the three black bushing guides. Pinion gear has black 1 inch long by 3/8?? drive tube on other end with cross slots in center looks like for drive wire that had loop on the end. Also belt drive unit for main gear also looks like GMP with red plastic pully. Tail shaft with red pully, one end of shaft has 1/4 inch by 3/8 long end just out side of pully a quick look at it???? Could any of these be Intrepid parts???? THANKS |
