rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 605 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page438 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
Kyosho Caliber 30 & 60 - Concept - Nexus > Cal 30 CCPM Question...
 
 
ThrottleHold
Heliman
Location: Cape Girardeau, Missouri

Is anyone doing the Cal 30 in CCPM whilst using JR servos? In the pictures, it shows the servo horns closer to the rotor. However, I've had to spin around the two outside servos just to get the links to connect to it.

Has anyone else put in JR servos -- did you have to flip 'em around to get everything to fit?

Tks,
Ben
10-27-2002 Over year old.
 
 
d-n-jensen
Veteran
Location: Bellevue WA

I have 3 8101 in my Caliber 30 and set it up as shown in the manual. The links from the servo's to the bell cranks are set and are not really adustable. I have my balls on the servo's at 12mm from center and they have enough clearence to work fine. I did have to trim off the excess horns as shown in the manual. It works fine. I also installed the JR servo horn brace that holds the output shaft in place. Much tighter CCPM with them
10-28-2002 Over year old.
 
 
1 page438 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
Kyosho Caliber 30 & 60 - Concept - Nexus > Cal 30 CCPM Question...
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 22 - 3:31 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie