rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 629 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page303 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
Kyosho Caliber 30 & 60 - Concept - Nexus > How To... Wash-Out Arm
 
 
ThrottleHold
Heliman
Location: Cape Girardeau, Missouri

My Wash-Out Arm broke. Part of it is stuck in the Wash-Out Arm Link with a 3x12mm pin.

How do I get the pin in and out? Do I vice it and pound the pin out? Is there a slick strategy for getting 'er in and out?

Tks,
Ben
10-26-2002 Over year old.
 
 
mrNoodles
rrProfessor
Location: Borlänge, Sweden

What heli are you talking bout Ben?

Anyway, it should look the same on all

Try to use a small dowel to push it out, may have to use a hammer, but be careful. From my side of view it´s held onplace by sitting in the wash out arm and rotates free wash out arm link!

Good luck

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.
10-26-2002 Over year old.
HOMEPAGE  
 
 
ThrottleHold
Heliman
Location: Cape Girardeau, Missouri

Sorry, it's a Caliber 30.

Ben
10-26-2002 Over year old.
 
 
1 page303 viewsPOST REPLY
Model Rectifier Corp . Heli Wholesaler . 3D Heli Depot

.
.
Kyosho Caliber 30 & 60 - Concept - Nexus > How To... Wash-Out Arm
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 22 - 3:45 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie