doo
Heliman
Location: washington state
| hello, I have an esky lama 2 and recently have developed a problem. I can take off with plenty of power, and after about 30 seconds of flying the roters slow down and the helli drops to the ground. If I lower the throttle stick, and wait a second or two, the heli then can take off with full power and fly for about 30 seconds, and the problem repeats. I can repeat the ~30 seconds of flight and 3 seconds of idle, then power up for another 30 seconds or so.
What I have noticed. During the first 30 seconds of good power, the green LED on the 4 in 1 controler is lit up. When the heli looses power, the green light changes to red. After lowering the throttle the light goes back to green, and the process repeats.
What does it mean when the led is red?
what can I do to fix the problem? When I first got the heli I was able to fly the entire battery without touching down, now for some unknown reason i can only fly for ~30 seconds.
Thanks for ANY help.
doo |
