RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 475 ONLINE 50 EVENTS SEARCH REGISTER  START HERE
 
1 page3468 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
e-Mikado Logo 400 500 600 > Logo 10 3D Video
 
 
Andreas_S
Senior Heliman
Location: Albstadt, Baden-Württemberg, Germany

click here

Logo 10 3D in action

more at:

www.logo103d.de

Team Mikado, Team Flightpower, Logo 500 3D VBar :: Logo 14 VBar ::
03-20-2006 Over year old.
HOMEPAGE  
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

Whooohoo - smooth flying Andreas!

Cant wait to get mine - it should be at the post office now
How do you think the Logo performes compared to the raptor?

Here is a video of my raptor taken a couple of weeks ago. It was -7C and I lost the feeling in my fingers after 30 seconds...
http://dev.intbuilder.com/lorsoft/Lorents3D.wmv



What comes around goes around.
03-20-2006 Over year old.
HOMEPAGE  
 
 
Andreas_S
Senior Heliman
Location: Albstadt, Baden-Württemberg, Germany

with the right setup the logo 10 has a little more power as the raptor 50. The cycling is a bit slower but I will work to get this thing rocking, too. I will post if i can get a better cycling rate.

Team Mikado, Team Flightpower, Logo 500 3D VBar :: Logo 14 VBar ::
03-20-2006 Over year old.
HOMEPAGE  
 
 
gywox
Heliman
Location: Sweden

Hi Andreas, could you post your setup? Are you using Tango 45-10? I'd like it if you could post your setup, including servos/gyros/esc etc =)
03-20-2006 Over year old.
 
 
Andreas_S
Senior Heliman
Location: Albstadt, Baden-Württemberg, Germany

Kontronik Tango 45-10
Jazz 80
Graupner JR DS3728 on TS
Gyro Futaba 611
Schulze 835 Reciever

6s1p Flightpower EVO 20 3700

Team Mikado, Team Flightpower, Logo 500 3D VBar :: Logo 14 VBar ::
03-22-2006 Over year old.
HOMEPAGE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

Hey Lorrents gj there man! I enjoyed your vid, as well as Andreas vid to .


Funny hearing a nitro, the good ol Raptor. I still got mine too, it is now my beating machine and my victim for new moves.

...Once upon a time there were Nitros, flybars and frequency pins...
03-24-2006 Over year old.
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

Thanks Shawn!

The raptor is a good work horse, but if my Logos work out like I plan I'll probably sell it with all my nitro accessories this spring and go e-power only



What comes around goes around.
03-24-2006 Over year old.
HOMEPAGE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

Wooohoooo!!! Dude you got more snow than me, that's crazy. And yea the nitros are fun, but nothing beats plug n play! I like walking off the pad and saying I think I am running abit rich, oh wait it's an electric. LOL

...Once upon a time there were Nitros, flybars and frequency pins...
03-25-2006 Over year old.
 
 
Heligio
Senior Heliman
Location: Belgium

Hi Andreas,

Can you say wich headspeed you're running in the movie?
Wich size of pinion do you use and how long are your flighttimes with that EVO 20 3700 Lipo pack?

Regards,
Gio.
03-30-2006 Over year old.
 
 
Andreas_S
Senior Heliman
Location: Albstadt, Baden-Württemberg, Germany

I don't know the headspead but it is a 14 tooth pinion on module 0.7 and a flighttime of about 6 Minutes

Team Mikado, Team Flightpower, Logo 500 3D VBar :: Logo 14 VBar ::
03-31-2006 Over year old.
HOMEPAGE  
 
 
cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

Hello Andreas. Wonder how did you convert a logo 10 pinion from 0.5 to 0.7 mod. or am I missing something here.

thanks.
03-07-2009 09:21 PM
 
 
MrNiceGuy
Senior Heliman
Location: Rockledge, FL

Holy back from the dead thread. The last reply was like 3 years ago. To convert a Logo 10 to mod .07 gears you have to change the pinion, the main gear, and the tail drive gear. I did this on my L10 when I stretched it to a 550. I am now running mod .01 gears from a Century Swift because they are much cheaper than the Mikado .07 gears. If you want to do that conversion you need the pinion, main , and tail gears, plus the 2 bearings for the tail gear. The mod .07 are much stronger than the .05s. I believe the mod .01 will be stronger yet.
03-08-2009 03:52 AM
 
 
cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

Thanks Mrniceguy. Which main and tail gear did you use? Do you have the parts No.?

thanks
03-08-2009 06:14 PM
 
 
DanSch
Heliman
Location: charlotte, nc

here ya go.

http://www.readyheli.com/MIK3001_Dr...7_p/mik3001.htm

http://www.readyheli.com/MIK3000_Ma...7_p/mik3000.htm

and use your existing one way.

http://www.readyheli.com/RevCo_Pinions_s/109.htm

and while your at it .

http://www.readyheli.com/MIK3046_Ta...c_p/mik3046.htm

and if you don't already have it..

http://www.readyheli.com/MIK4069_Ta...l_p/mik4069.htm
03-08-2009 07:07 PM
 
 
cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

This is great. I did not realized you can actually use some logo 14 parts for logo 10.

Thanks for the advice.
03-08-2009 07:51 PM
 
 
MrNiceGuy
Senior Heliman
Location: Rockledge, FL

You can also get a longer tailboom and belt and run 550 size blades. I did this and I like it so much better now as a 550 than as a 500(Not that it was bad before by any means)
03-08-2009 09:12 PM
 
 
DanSch
Heliman
Location: charlotte, nc

i believe this is what you need to run 550's

http://www.readyheli.com/MIK2769_Ta...0_p/mik2769.htm

though i have not done it, i'd sure like to entertain the idea..
03-08-2009 10:17 PM
 
 
MrNiceGuy
Senior Heliman
Location: Rockledge, FL

Yes that's what you need to run 550s. It really flies much "larger" with the 550s. For cheaper Tail booms you can get the ones from the Esky Esmart. Carbon boom is $18 aluminum is $4-5. This can save you a good amount over buying the Mikado booms.
03-09-2009 01:42 AM
 
 
1 page3468 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
e-Mikado Logo 400 500 600 > Logo 10 3D Video
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Sunday, July 5 - 1:05 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie