RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 475 ONLINE 50 EVENTS SEARCH REGISTER  START HERE
 
1 page1344 viewsPOST REPLY
Heli Wholesaler . JR-Spektrum . Gyro Hobbies

.
.
e-Mikado Logo 400 500 600 > 3D with stock logo 10
 
 
Pitounet
Senior Heliman
Location: France

Hi,

In france, the french version of the logo 10 contains the LLS head of the logo 10 3D. I would like to buy a logo to do 3D with V28 cells. The logo 10 is quite inexepensive in france (239€ ie 275$). Is it possible to do medium to aggressive 3D with a stock logo 10 with the logo 10 3d lls head?
I don't know the logo very much I would appreciate any help.
If I need to change some parts from the stock kit, can you tell me what part I will need to change?
03-07-2006 Over year old.
 
 
TOMDH
Heliman
Location: WA

It depends on your power system and servos. You should be able to do 3D with standard Logo-10 kit.
03-08-2006 Over year old.
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

It is not an issue at all, the 3D cyclic ability in the L10 is much better now with the LLS head.

...Once upon a time there were Nitros, flybars and frequency pins...
03-08-2006 Over year old.
 
 
Pitounet
Senior Heliman
Location: France

Cool thanks all,
I will buy my logo 10 to my LHS, that will be the first time i'll buy a kit from my LSH as prices are generally really high in france

Logo 10 275$ from LHS
Neu 1907/1.5y 190$
2 packs of V28 cells about 170 $ shipped from ebay
Schulze controller 230 $
I already have Gy401 + s9650
I have a multiplex polo digi 4, i'll need 2 more polo digi 4 : 90$ from LHS

About 1000 $ for a logo 10 ready to fly, it is not very far from what i payed for my TREX.
03-08-2006 Over year old.
 
 
Shun
Senior Heliman
Location: Houston, Tx

I would sugguest a 9254 or 9253 for the tail servo....just my 2cents
03-08-2006 Over year old.
 
 
tomber
Heliman
Location: Graz / Austria / Europe

What are these V28 cells? These?:

http://cgi.ebay.com/Milwaukee-48-11...1QQcmdZViewItem

If yes, you can forget 3D ... Think of current, think of weight! 500 grams for a 18.5 Volt battery that can handle ~90 amps is o.k. What's the current rating and weight of these LiIon cells?

I'd suggest going for Flightpower EVO20 or ThunderPower ProLite 4200, maybe Kokam 3700, but I think they are a bit heavy, though.

Christoph
03-09-2006 Over year old.
 
 
Shun
Senior Heliman
Location: Houston, Tx

not sure about that one...I pm'ed Gary Goddrum and he says u can do hard 3d with a logo 10 on the v28 cells for about 8 minutes with reserve
03-09-2006 Over year old.
 
 
tomber
Heliman
Location: Graz / Austria / Europe

I just had a look at the specs. 2.5lbs for a 18V 3Ah battery? That's crazy! You get an old NiCad with the same specs at about half the weight (and half the price).

EDIT: Where can I find these batts (getting curious?) Couldn't find them at tppacks.com?
03-09-2006 Over year old.
 
 
Pitounet
Senior Heliman
Location: France

Tomber
It is the exact cell as you posted.

The package of the celles weights alot, you have to remove the case and all the electronics then keep only the cells.
They CAN DO HARD 3D there are alot of vids that shows it. Better than ni-mh and ni-cd period. Weights a bit more than li po but you don't have all the problems that you have with lipos.
03-09-2006 Over year old.
 
 
tomber
Heliman
Location: Graz / Austria / Europe

Cool. Looking forward to your experiences!
03-09-2006 Over year old.
 
 
1 page1344 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
e-Mikado Logo 400 500 600 > 3D with stock logo 10
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Sunday, July 5 - 1:12 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie