RunRyder - using an AXI 2820/10 in a Corona

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 738 ONLINE 19 EVENTS SEARCH REGISTER START HERE

1 page

478 views

POST REPLY

RCHover	.	RC-Direct	.	HeliDirect
	.		.

e-Lite Machines Corona > using an AXI 2820/10 in a Corona

TexasRick
Heliman
Location: Austin, Texas

I am ready to buy a Corona as my first heli after flying RC planes for years. I have a AXI 2820/10 and a CC 45 ESC that would seem to work well if I can get the gearing right.
The specs are:
Kv: 1100 rpm/volt
Max. Continuous Current: Approx. 30 Amps
Max Current: 40 Amps for 60 seconds
Cell Count: 7 - 10 cells
Length: 54.5 mm (2.15 in.)
Diameter: 35.2 mm (1.39 in.)
Weight: 161 g (5.8 oz.)
Motor Shaft: 5mm

It sure would be nice if I could use this motor and ESC for the Corona.
I also have a Futaba 7CA... wish I bught the 7CH now!
Thanks very much in advance

02-01-2006 Over year old.

HOMEPAGE

TexasRick
Heliman
Location: Austin, Texas

Should have mentioned...

That I plan on using Polyquest 3s1p 3100mah lipolys in the corona if they fit, These batts and the AXI 2820/10 were a great combo in my fixed wing!

02-01-2006 Over year old.

HOMEPAGE

computerbob
Senior Heliman
Location: Westchester County, New York

TexasRick,

The 2820/10 will be fine -- even with 8-cell, but you need to use a 4:1 ratio. I used Matt's (www.ballistictechnology.com) 4:1 Axi belt drive system. XL timing belt and 10t and 40t pulleys. I guess if you could find a 24t pinion gear with 5mm inside bore, that would work with the 102t stock gear.

-Bob-

02-01-2006 Over year old.

askman
Senior Heliman
Location: willamette valley, Oregon

matt has a new version of outrunner drive with aluminum main pulley. it is very nice. hyperdrive v3.0

02-02-2006 Over year old.

1 page

478 views

POST REPLY

Heli Wholesaler	.	3D Heli Depot	.	JR-Spektrum
	.		.

e-Lite Machines Corona > using an AXI 2820/10 in a Corona

PRINT TOPIC

Advertisers

Subscribe to This Topic