rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 600 ONLINE 28 EVENTS SEARCH REGISTER  START HERE
 
1 page323 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > JR Venture clutch liner??
 
 
Dazzler
Elite Veteran
Location: Ohio

Does anyone know how to change the clutch liner in the Venture? It looks like the one that is in there is really hard to get out. Thanks, Daz...
10-05-2002 Over year old.
HOMEPAGE  
 
 
CWM#2
Heliman
Location: see cwm profile for all this stuff

Daz
I use my lathe to remove old liner.
I glue the new one in with JB Weld then turn it down nice and tight on the lathe to fit the clutch .
10-07-2002 Over year old.
 
 
Dazzler
Elite Veteran
Location: Ohio

So you have to have a lathe to do this? Dont own one of those, might have to stay away from that then, and buy the whole assembly. Thanks, Daz...
10-07-2002 Over year old.
HOMEPAGE  
 
 
Phoenix-IT
Senior Heliman
Location: Dallas, TX

I hear that they are epoxied in there.... and that all you need to do is put the oven on like 450 degrees and put it in there and it will soften the epoxy and will just drop out. If not, try an exacto knife while it's hot.
10-07-2002 Over year old.
 
 
Dazzler
Elite Veteran
Location: Ohio

Thanks Phoenix that sounds alot better, a guy at the field yesterday said that it was just epoxied in there too, I see a new clutch liner for the venture is $1.59 and I thought I would just order one for backup. Thanks, Daz...
10-07-2002 Over year old.
HOMEPAGE  
 
 
1 page323 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > JR Venture clutch liner??
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Monday, October 6 - 2:25 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie