Foxden
Key Veteran
Location: Port Charlotte, FL. USA
| My RecomendationsSince your going to want the 3D flybar and if you order an ARF your going to pull the stock flybar I would install the 3D seesaw, even if you don't use the inner hole for 3D, you may want it at some point in the future and instead of having to pull everything apart you'll already have it installed and you can leave the seesaw arms in the stock location.
I prefer the slipper on the tail drive, I would highly suggest getting the 3D yellow dampers, they fly great for hovering and FF and remain very stable and also will allow you as your ability progresses to do 3D in the future, remember the Tiger is so smooth it will take a beginner from mild to wild pretty quickly because it will give you comfot level so you can progress fairly quickly.
The tail pitch control mod is nice but, you won't need it right away unless you just want to order everything up front, We have 3 cases of fuel through one of our Tigers and haven't had a problem with the tail pitch nubby's. The stock blade grips with the yellow dampers will be fine for starting out, unless your planning on really trashing your Tiger and haven't mastered the art of collective management you shouldn't need the 3D grips.
Clyde Fox
Port Charlotte FL
RJX of USA Field Rep
Team Rotorworkz
Morgan Fuel Rep |
Thanks!
