rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 815 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page337 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
Century Hawk - Falcon - Raven - Predator > Hawk Sport Rotor Head
 
 
Kaos2
Senior Heliman
Location: Tennessee

My Hawk Sport has 6 tanks of fuel through it now in hovering practice. I've noticed that recently when I lift it by the rotor head it has developed a little vertical play (~1mm). Is this normal, or do I need to adjust something?
10-01-2002 Over year old.
 
 
ltaustin1e5
Senior Heliman
Location: EVANSVILLE, IN

Vertical play

I would check your mast stopper, it is below the top bearing on the main shaft. Loosen the 2 set screws and push down on rotor head while making sure mast stopper is flush against top bearing and tighten both setscrews. Then check for vertical play.
10-01-2002 Over year old.
 
 
Kaos2
Senior Heliman
Location: Tennessee

That's the adjustment I suspected that I needed to make. I just wanted to make sure it's supposed to be "tight". There was something in the manual about gears "wearing in", which is what I think made the vertical play noticeable. Thanks.
10-01-2002 Over year old.
 
 
concept1
Key Veteran
Location: Youngstown, OH

yep, thats it, I also have about 6 tanks on my Se and just did the same adjustment.

JOn
10-02-2002 Over year old.
 
 
1 page337 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
Century Hawk - Falcon - Raven - Predator > Hawk Sport Rotor Head
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 8:07 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie