corey11
Elite Veteran
Location: Bay Area, California
| o thats easy......
D/R >dual rated
HV-T >hover throttle
HOLD >throttle hold
REVO >REVOlution mixing
HVP> Hover pitch
Remember, you must get to your menu by pressing both hyour mode buttons at the same exact time. that gets you into your menu. and everything is in there.
To set the dual rates you have to raise or lower the percentage with your +or- buttons. first you have to get to your menu by pressing BOTH the mode buttons at the SAME exact time.
To set up the hover throttle, you have to got to the HV-T screen and change the percentage with the +or-/
To change the throttle hold, you have to go to the HOLD screen and adjust it there with the +or-. yo have to have idle up working to do autos.to do that, go to the IDLE screen and adjust it there. try it a 50 percent first. i wouldnt worry about idle up, or throttle hold if your just hovering.
For revo, you want to turn it off. most gyros wont work properly with it active. just turn the percentage to 0.
For the hover pitch, to adjust it you have to turn that little nob by the elvater dual rates switch. or go to the screen that shows HVP. when your at that screen, and if you turn the nob, youll see the percentage changing.
hope this helps!
Corey |
