RunRyder - Brushless motor and stock 4in1 works!

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 791 ONLINE 20 EVENTS SEARCH REGISTER START HERE

16 pages [ << < 4 5 ( 6 ) 7 8 NEXT >> ]

31118 views

POST REPLY

Autography FlightPower	.	Advantage Hobby	.	Revolution Models
	.		.

e-E-Flite Blade CP mCX CX 400-3D > Brushless motor and stock 4in1 works!

midwestpilot
Elite Veteran
Location: Crystal Lake, IL

Stealth...

keep us informed on this motor...looks interesting!!

In life there is no spacebar!

Rich Erikson AMA 6175

12-12-2005 Over year old.

HOMEPAGE

stealth916
Veteran
Location: Rocklin, CA

Betafazzo - Your head speed must be too high.

12-12-2005 Over year old.

Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

Betafazzo, try hooking up the stock main motor and see if the tail motor can keep up with it.

Awais

12-12-2005 Over year old.

Betofazzo
Senior Heliman
Location: Venezuela

Yeah..,my stock 370 motor and 9t whit simetrical blades, 3 cell lipo work great whit the tail setup, (gws edp50/4520 prop), the himax 4100 have amazing power even whit 8t..

I'm charging batteries....

12-12-2005 Over year old.

Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

I'm gonna go home and take a video of mine. I just put on a 9T pinion yesterday.

One thing you can do is go fully seperates. That'll mean esc/gyro/motor for tail. The motor everyone recommends is feigao long can motor 12x30mm 4100kv.

Awais

12-12-2005 Over year old.

stealth916
Veteran
Location: Rocklin, CA

Betafazzo - are you using the stock Transmitter or programmable one? Thanks!

12-12-2005 Over year old.

FlyrEric
Senior Heliman
Location: Gulf Coast FL

Don't know how many of y'all saw my other thread about going brushless, but I was wondering if anyone else has tried a solderless solution that is workable. I'm going to have a go at making some shorter servo wires. I may be a bit too ignorant, but I can't figure out how to use the stock gyro and get everything to plug into the 4in1.
Any tips, suggestions or thoughts would be great!

12-12-2005 Over year old.

Betofazzo
Senior Heliman
Location: Venezuela

Stock radio my friend...

I'm charging batteries....

12-12-2005 Over year old.

stealth916
Veteran
Location: Rocklin, CA

Betofazzo - thanks for the info. I think the reason others are successful with 4100Kv motor on 3s lipo, is because they have a programmable radio and are turning throttle down to 60-70%.

Is there any chance for you to try 2s lipo and 10t pinion?

12-13-2005 Over year old.

Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

I think its a bad tail motor. I just flew mine with 4100kv 9t pinion with a gwd dd, and it keeps up with it great. I'm getting the yoyo

, ended up crashing and the tail boom is gone now.

12-13-2005 Over year old.

crazhorse
Senior Heliman
Location: texas

I have a razor mhv2 (4300kv) in my hb cp2, with the dd and a 3020 prop and a gy240 on the tail....... worked fine..... then I went and screwed up my settings on my 9c and wacked it into the ground. broke a part that nobody has in stock in the US. so i ordered 3 from ebay (coming from Hong Kong i think) may be grounded a while

12-13-2005 Over year old.

Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

crazhorse, did you ever get the yoyo in your cp2? I just can't seem to solve it. I got all new head parts and its still doing it.

12-13-2005 Over year old.

crazhorse
Senior Heliman
Location: texas

I just got it all set up on friday, its a bare airframe ...... it was fine the little i got to mess with it before i crashed.

12-13-2005 Over year old.

Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

Hope you get it back up soon. I had a tail boom crash too

How does the GY240 hold the tail using the GWS DD motor?

Awais

12-13-2005 Over year old.

crazhorse
Senior Heliman
Location: texas

it held the tail very well

12-13-2005 Over year old.

Hughes500E
Heliman
Location: Armstrong BC Canada

crazhorse:
What pinion did you use on your Razor? I just received mine!

12-13-2005 Over year old.

crazhorse
Senior Heliman
Location: texas

I used a 8t off a blade motor, I didnt get to mess with it enough to get the pitch/throttle curves down all that well........... I got a eflight 3600kv for it but wanted to see how the razor did

12-13-2005 Over year old.

Hughes500E
Heliman
Location: Armstrong BC Canada

Cool, I bought an 8,9 and a ten

I was thinking of putting the 8 on for longer flight times. How do you like the razor on it?