rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 677 ONLINE 42 EVENTS SEARCH REGISTER  START HERE
 
1 page299 viewsPOST REPLY
ZoomsHobbies . HeliHobby . Ron’s HeliProz South

.
.
Audacity Models Pantera 50 - Tiger 50 > kavan jet ranger for tiger 50?
 
 
huey nut
Senior Heliman
Location: DRIPPING springs texas

wounder if this heli mechanics will fit the kavans fuse?
10-19-2005 Over year old.
 
 
doorman
Elite Veteran
Location: E.Berne, NY

Fit???

If you could supply some dimensions on the fuse, I am sure there is a Tiger pilot out here that will try and help you out.... I have one that I would share some measurements on.....

Stan

If there is a cure for this, please don't tell me about it!!!
10-20-2005 Over year old.
 
 
tim tompkins
Veteran
Location: Boston, Georgia sw Ga. Thomas County

Twenty years ago?

I haven't seen a Kavan fuse in so long I'm not sure what size it was. They were sixty size but used about 600 mm blades I think.You won't get too many guys that are starting out in the hobby that have even heard of Kavan. Good luck. TimT
10-20-2005 Over year old.
 
 
huey nut
Senior Heliman
Location: DRIPPING springs texas

kavan

TIM,

i picked the kavan i located like new in box for my scale build as it has the MOST SCALE JET RANGER FUSE PERIOD... ill buy a tiger anyway i wanted one, and plan to convert it to electric, and it has the autorotation, and updated mechanics anyway, ill bet it will work, the tail rotor exits the same side....
10-20-2005 Over year old.
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

It was so scale that Bell used one for their wind tunnel testing for later improvements. The skids gotta go though.


AMA 77227
http://www.jaxrc.com
10-20-2005 Over year old.
 
 
huey nut
Senior Heliman
Location: DRIPPING springs texas

i have accesss to a full size jetranger used with hi rescue skids, i plan to make mine out of aluminum with mid steps
10-20-2005 Over year old.
 
 
doorman
Elite Veteran
Location: E.Berne, NY

Plan In The Works.....

Sounds as if there is already a plan in motion on this project.... if the Tiger fits, which I would bet it will, you will have an excellent flying heli, and electric should be even better!!!!! Hope you will be posting pic's...
But if you need any Tiger measurments, I would be glad to check whatever you need... mine is sitting in the shop....
Good Luck, Stan

If there is a cure for this, please don't tell me about it!!!
10-20-2005 Over year old.
 
 
huey nut
Senior Heliman
Location: DRIPPING springs texas

CRAP!!!!!!!!! just noticed the tail rotor is on the other side!!!!!!!!! ahhhhhhhh is there a way to flip it over?
10-20-2005 Over year old.
 
 
doorman
Elite Veteran
Location: E.Berne, NY

Flipping The Tail

Don't see a big problem here at all. The Tiger uses a belt drive so just roll the boom over and reverse the blades and the twist in the belt, should do it.....
Stan

If there is a cure for this, please don't tell me about it!!!
10-20-2005 Over year old.
 
 
1 page299 viewsPOST REPLY
Century Helicopter . MTA Hobbies . Model Rectifier Corp

.
.
Audacity Models Pantera 50 - Tiger 50 > kavan jet ranger for tiger 50?
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, September 5 - 5:10 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie