rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 304 ONLINE 42 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]2069 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
e-Robbe Eolo > Just some pics
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

http://www.happyhangar.com/displayimage.php?pos=-2189
http://www.happyhangar.com/displayimage.php?pos=-2188
http://www.happyhangar.com/displayimage.php?pos=-2187
http://www.happyhangar.com/displayimage.php?pos=-2186
http://www.happyhangar.com/displayimage.php?pos=-2185

The MAH blades fly nice but I dont like the root shape they cant fold back enough to use a blade holder

Been pretty quiet around here, hope everone is out flying.
10-02-2005 Over year old.
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

Nice pictures Buzzsaw.
I cant fold my MS blades either...

Its crappy weather here in Norway and it's getting darker - I guess the autumn is here



What comes around goes around.
10-02-2005 Over year old.
HOMEPAGE  
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

Thanks, autumn is here in nothern U.S. also And thanks for the info on the MS blades! I guess I will try Sab next, need to find something cheaper than those $75 BBT's
10-02-2005 Over year old.
 
 
jmiceli11
Senior Heliman
Location: Girard, PA 15 min west of Erie, PA, USA

What type of tailblades are those?
Still using the Aveox motor?

Great paint job!
10-02-2005 Over year old.
 
 
Laurens
Key Veteran
Location: NL, behind my computer

Thanks for the pics
10-02-2005 Over year old.
 
 
HugeOne
Key Veteran
Location: Quebec, Canada

With the quick uk grips will be able the fold your blades...

Nice paint job

Raptor e620 w/V-bar, Tango 45-06, Phoenix 85HV, TrueRC 12S1P 4000mAh
10-03-2005 Over year old.
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

jmiceli11, The tail blades are MAH Logo 10, I havent flown with them yet I need to get the HD tail hub. They are a bit thinner than the stock plastic and 10mm longer.

Yep still running my Aveox 27/26/2 on 5s 1800's.

Laurens, Your welcome
10-03-2005 Over year old.
 
 
HugeOne
Key Veteran
Location: Quebec, Canada

I flew my eolo with 75mm logo MAH tail blades with the stock hub at 2550HS with no problem.

I'm working on a special tail hub with spindle shaft, I'll report once tested...

Raptor e620 w/V-bar, Tango 45-06, Phoenix 85HV, TrueRC 12S1P 4000mAh
10-03-2005 Over year old.
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

Did not know the Quick grips where longer than the Pro's. Thanks, now I need more parts And expensive ones at that $62
10-03-2005 Over year old.
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

I have Quick Uk grips but cant fold my MS blades. Dont think they are that much longer than the stock ones, but I'll check the difference when I get back from work



What comes around goes around.
10-03-2005 Over year old.
HOMEPAGE  
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

Thanks Lorents, I would hate to spend $61 for no improvment, although I wouldnt mind having some blingin' blade grips
10-03-2005 Over year old.
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

They are almost the same. Tried to take a picture, but it wasn't easy with a 2 year old kid running around...

Plastic grip = 12,5 mm from start of opening to mid bolt
Q-UK = 14,0 mm





What comes around goes around.
10-03-2005 Over year old.
HOMEPAGE  
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

Thanks Lorents, 1.5mm might just do it I'll have to check it out.

I cant afford the stiff Heliup gyro tray so I made this to give support to the rear end, works great very solid now.

http://www.happyhangar.com/displayimage.php?pos=-2190
10-04-2005 Over year old.
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

Nice, do you notice any difference from the stock servo tray?



What comes around goes around.
10-04-2005 Over year old.
HOMEPAGE  
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

20% on my gyro gain so far I also noticed my canopy has less vibes in it now. I used to have a chunk of wood glued in there. That looked like a hack job though
10-05-2005 Over year old.
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

20%... I have to get rid of that stock tray



What comes around goes around.
10-05-2005 Over year old.
HOMEPAGE  
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

Just a small updae:

Finally got the Polo4 servo and installed it with a stiffer gyro tray. Could not change much on the gain but I put the 401 in digital mode and have gone through two packs without any problems. The tail holds great now



What comes around goes around.
10-15-2005 Over year old.
HOMEPAGE  
 
 
Helifool
Veteran
Location: Rochester New York

Nice paint job man. I have to do that gyro plate mod now. Where did you get the extra clamps to do it? No one seems to have those parts.
10-17-2005 Over year old.
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

Thanks, The clamps were in my spare kit so I just had them sitting here, I dont have my manual handy right now but will check the part number and let you know. I did look at a couple places and couldn't find them either
10-17-2005 Over year old.
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

... and I was lazy and got the stiffened gyro plate from Heliup...



What comes around goes around.
10-17-2005 Over year old.
HOMEPAGE  
 
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]2069 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
e-Robbe Eolo > Just some pics
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, September 5 - 9:37 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie