rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 737 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page878 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
After Market Accessories > Quick Carbon main blades
 
 
the Wasp
rrProfessor
Location: Vt

Has anyone tried or used the Quick Carbon main blades ?!!

Jim
09-07-2002 Over year old.
 
 
Rick M
Heliman
Location: New Jersey

I have had two sets of the 550 carbon blades that I used on my raptor 30. Just bolted on and they flew great
02-02-2003 Over year old.
 
 
Twin II
Heliman
Location: University Park, IL

Quick carbon blades

That's all I use is quick carbon blades they fly great and are much cheaper than other carbon blades
02-03-2003 Over year old.
HOMEPAGE  
 
 
1UP
Key Veteran
Location: Claymont DE.

Hi Jim !!!! i have been using the Quick maine blades for a year now!!! 680 on my 60 heli and 600 on my 50, I have to say one thing I do fine that thay seem to pith up in fast F/F And i'm not the only one to find this to happen to !!! I whent to MS blades for my 3-D flying, (still cheap)But if you are just doing fly around with your heli !!! then by all means go with them !!!!!
James

JAMES
member of the HOT GIRLS thread
If it's worth doing, then it's worth over doing
02-03-2003 Over year old.
 
 
effinjump
Heliman
Location: Lake Elsinore, CA

what would cause one blade brand to pitch up more than another during FFF, all things being equal? could it be lift characteristics?

i fly a full size heli as well, and pitch up has ALWAYS been a good thing in my book. that means LIFT is increasing and i am climbing.
04-18-2003 Over year old.
 
 
the Wasp
rrProfessor
Location: Vt

Pitching up,,, as far as I know it's caused from the trailing edge being to heavy (on your main blades)...


what full size do you fly ??

Jim

Jim
Buzz Buzz Buzz
04-18-2003 Over year old.
 
 
1 page878 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
After Market Accessories > Quick Carbon main blades
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 10:24 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie