Nate
Heliman
Location: Lexington, KY
| Riverman,
I probably wasn't very clear in what my problem was. I've never worked on servos before so I'm trying to figure this thing out. Before I took off the one bad servo it acted like it was stuck and it would squeel very loud like it was trying to move but couldn't. I could turn the servo arm by hand to center and the noise would quit but any input wouldn't move the servo. First I thought I had a stripped gear. I took it apart and the gears looked fine. Next I thought the motor was toast so I took the first gear out from the motor off so gears wouldn't go flying when I plugged in the battery and the motor ran. Hope this explains my problem better. Any ideas???
Thanks |
