rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 710 ONLINE 46 EVENTS SEARCH REGISTER  START HERE
 
1 page242 viewsPOST REPLY
E-flite . Next D . Fast Lad Performance

.
.
e-E-Flite Blade CP CX 400-3D > HONEY BEE CP 2 wobble?
 
 
zoobie
Senior Heliman
Location: South Africa

I am quite new at flying cps and had quite a bad crash! The problem is that I now have a wobble in my heli which gets worse as i increase throttle. It is so bad that I have not even tried to take off again. These are the things I have checked: Balanced flybar and made sure it is straight (actually replaced it). Checked my main shaft on a piece of glass, ditto for the little horizontal shaft at the blade grips. I removed the main blades and still a wobble. What else could I have bent to make it so bad?
07-31-2005 Over year old.
 
 
mike7124
Heliman
Location:

I recently had a crash with my BCP. Had to replace the main blades. I also got a bad wobble. I changed the main shaft / gear assy, but the shake was still there. Higher power settings made it worse. Turned out, the blade tracking was off by quite a bit. Tracking the blades cured the shakes.
08-01-2005 Over year old.
 
 
1 page242 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
e-E-Flite Blade CP CX 400-3D > HONEY BEE CP 2 wobble?
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 3:03 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie