rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 393 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]2868 viewsPOST REPLY
CanoMod . A Main Hobbies . Boca Bearings

.
.
Henseleit 3DNT - Rocket - 3DMP > 3D NT latest setup
 
 
Stephen
Senior Heliman
Location: Hong Kong

3DPP,

I am much better now. I thrown a VisionX around for 4 hours almost non-stop, Webra 91, 11.5 degree in idle up.

Well I did crash it at the end of the day when light was not very good anymore and I was too tired.

I had lots of fun and will try out my X-Cell SE/Webra 91 right after the storm.

Stephen
CHRC
09-11-2002 Over year old.
 
 
3DPP
Senior Heliman
Location: Vienna/Austria

Hi Stephen
Hey I´m happy with you that you can handle now the 91AAR power,but be carefull with the NT is a lot more that I can handle in 3D stile.
Hope to see you in next time in Austria spezialised in the evening by wine and porky.
bg peter
09-11-2002 Over year old.
HOMEPAGE  
 
 
Stephen
Senior Heliman
Location: Hong Kong

3DPP

You bet :-)

Stephen
09-11-2002 Over year old.
 
 
christophe
Heliman
Location: Caen / France

Lottle carb

Hello...

Where i can buy a Lotthe Carburator ?

Thanks.
09-11-2002 Over year old.
 
 
3DPP
Senior Heliman
Location: Vienna/Austria

Hi Christophe
Here the addr. and Tel.

U. Lötterle
Johann-Peter-Hebel-Straße 3
D-75223 Niefern-Öschelbronn

Tel. 0049-7233/974713
Fax.0049-7233/9749682

bg peter
09-11-2002 Over year old.
HOMEPAGE  
 
 
Peter G
Senior Heliman
Location: Runcorn, Cheshire, UK

3DNT Radio setup With Futaba FF9

I am trying to set up the radio which is a Futab FF9 on my 3DNT.
What swashplate setup do i use as there is two 120degree swashplate settings available, SW-N3 and SWR3.
I am sure the answer is simple, but this is the first CCPM heli I have tried to set up.
Any help would be very much apreciated.
Thanks
Peter G
09-11-2002 Over year old.
HOMEPAGE  
 
 
christophe
Heliman
Location: Caen / France

RSV2000 Carb

Thanks 3DPP !!

Christophe.
09-12-2002 Over year old.
 
 
squirrel
Veteran
Location: South Whitley, IN

Christophe>>

I will sell you my Lottrle carb for $75.00 plus shippng. I am going to a Webra and will not need it.

Fred
09-13-2002 Over year old.
HOMEPAGE  
 
 
smorrison
Heliman
Location: Cape Coral Florida

Squirrel

I thought you were selling your 3D NT? Did you change your mind and you're keeping it now? It sounds crazy, but I still haven't finished mine yet. I was at IRCHA and saw Russ Deakin fly his several times, and it was the hit of IRCHA (maybe aside from demo flights by Todd Bennett and Jason Krause). I think the interest is growing in the States on the 3D NT.
On the topic of fuel, I was told to simply go to a paint store (or a race shop) and by methanol very inexpensively by the gallon, and then buy Klotz KL200 and mix the recommended 12% mixture. Another option I was told, was to buy 15% nitro, and mix 2/3 gallon 15% heli fuel with 1/3 gallon methanol.

There seem to be several opinions on what's best.
09-15-2002 Over year old.
 
 
squirrel
Veteran
Location: South Whitley, IN

DON'T buy the cheap methanol. It will not run very good and the exhaust coupler will melt. VP racing might have a dealer in your area so you can buy quality methanol. The Lottle carb is not very good, an OS carb would be a better choice. Webra has a rev. engine I am going to order one for mine and scrap the OS/Lottle engine.


squirrel
09-15-2002 Over year old.
HOMEPAGE  
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]2868 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
Henseleit 3DNT - Rocket - 3DMP > 3D NT latest setup
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, July 9 - 6:56 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie