RunRyder - Avant build

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 388 ONLINE 45 EVENTS SEARCH REGISTER START HERE

1 page

497 views

POST REPLY

Futaba-RC	.	Next D	.	Fast Lad Performance
	.		.

Avant Aurora - EFX - FX > Avant build

Jensen
Heliman
Location: UK

Just collecting the parts together ready to build my Avant (when it arrives). Am I right in thinking that only 1 servo extension lead is needed (for the tail Servo). Anything else required or points to note?

Thanks in advance

04-26-2005 Over year old.

bigglesbutler
Veteran
Location: Aberdeen, Scotland

Dont need the servo extension at all, tail servo is at front with all the others

.

Get some new hirobo plastic ball links 2524-001, mine looked at bit worse for wear. Get a couple of spare Hirobo balls with the 5mm shoulder, 2525-007. And if you are going to use the 8.08 ratio get a washer 2506-029.

Other than that its all on the freya, ENJOY.

04-26-2005 Over year old.

maayan
Senior Heliman
Location: Israel

Where does the 2506-029 washer comes to?
Other than that what is needed for upgrade a standart Freya?

Maayan

04-26-2005 Over year old.

HOMEPAGE

Patriot
Veteran
Location: Luton

Hi Bigglesbuttler
has the wind let up long enough for you to fly the Avant yet, if so how good.

Just smile

04-26-2005 Over year old.

HOMEPAGE

Jensen
Heliman
Location: UK

And if you are going to use the 8.08 ratio get a washer 2506-029. What for please ?

04-26-2005 Over year old.

Augusto
rrAdvertiser
Location: San Diego, CA

Si,

No need for the spacer if you use a regular ball with the brass washers that come with the kit. Also the CCPM Front lever has enough adjustment allowance to make the regular ball align vertically with the front swashplate ball. We need to update the manual about that.

Jensen,

Look at page 10 of the Instructions Manual for an explanation.
Also the correct part number is 2506-032 .

Augusto.

Avant Aurora Ultimate

04-26-2005 Over year old.

vetrider
Elite Veteran
Location: Daleville, AL (Ft.Rucker)

I would advise that you make sure the little buttonhead screws that are used to mount the "Ratio Block" (Step #21 Page #29) slide in and out of their holes before trying to mount them. The button heads allen sockets will strip fairly easy as will most small hardware of this type. Don't ask me how I know!!

Over all everything goes together very nicely.

Magnum Fuel

04-28-2005 Over year old.

1 page

497 views

POST REPLY

Esprit Model	.	Thunder Power RC	.	Real Raptors
	.		.

Avant Aurora - EFX - FX > Avant build

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic