rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 813 ONLINE 28 EVENTS SEARCH REGISTER  START HERE
 
1 page1008 viewsPOST REPLY
JR-Spektrum . Gyro Hobbies . E-flite

.
.
After Market Accessories > Replacing links
 
 
Helirey
Heliman
Location: Largo, Florida

Hey all,
I have a Shuttle ZXX and want to replace the z-bend linkages with ball links on the collective servo arms and I want to move the rudder servo to a tail mounted bracket.
I was wondering if anyone knows if someone makes a kit that allows you to make up your own links with a die to cut threads for the ball link ends.
TIA
08-03-2002 Over year old.
 
 
jetranger
Veteran
Location: PERHAM M.E.

Go to any tool supply shop they sell the dies $4-6 but most of the rods have rolled threads if you check the lenght of the rod most shops sell the rods just tell them what you need the rods sell for $1-$2 so you might be better off doing that
08-03-2002 Over year old.
 
 
Windspiel
Veteran
Location: Massachusetts

http://www.quickuk.co.uk/
http://www.ewtech.com/hhi/
Both of these links you can get ZXX replacments w/ball links they run around $45.00
09-14-2002 Over year old.
 
 
RCMarket
Key Veteran
Location: Belgium , Europe

links

what you need is 3 things.
1- balls
2- ball links
3- rods.

i can help you with all of them
you need to tell me what length you need of the rods, (count the ball links themselves)
for links use RCcity- they are the best, for the balls we have the standard balls you can mount on any servo horn.
for the rods, you have a choice, 2 or 2.3mm heavy duty.

Alex (Formerly Known as Futurac )
09-15-2002 Over year old.
 
 
1 page1008 viewsPOST REPLY
Next D . Fast Lad Performance . Ace Hobby

.
.
After Market Accessories > Replacing links
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, October 7 - 3:42 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie