hakim
Heliman
Location: Mombasa, Kenya.
| Hi Everyone,
Question 1
What is your ACTUAL mixing rod length on the Scaedu 30? Is it exactly according to the addendum sheet with the manual (33.5mm)? When mine is set to 33.5mm I get too much head speed but not enough pitch to lift off. If I adjust for 50 size engine (or near abouts) then I can lift off at 3/4 throttle. Am I straining the engine? However, I can still get enough head speed.
Question 2
Does your Scaedu engine lean out after half tank of fuel? I have to re-adjust my throttle mix to bring down head speed after half tank. What gives?
Thanks.
 |
