I am going through the Ion and was looking over the head and noticed the O-rings had worn against the shims creating a small amount of rubber debris between the grip and the spindle c-clip. I was running one 1mm shim along with one .25mm on each side. The head did feel a little soft doing 3D. What would you reccomend for 3D work?
Thanks
Dave
03-07-2005 Over year old.
East Coast Tanics Senior Heliman Location: SOUTH DAYTONA FLORIDA
I like the hard o rings wiht one thick shim on each side Eric larson told me to try this and i like it alot
The orings are 90 durometer hardness vs the stock 70s
Bobby
03-07-2005 Over year old.
rcman Veteran Location: Logan, Utah
I use the stock O-rings with all the shims that come in the kit
it is very hard to get the E-clips on but after you fight that for a while the head is very stiff
I may have to try what Bobbie is saying, that sounds a lot easier
if it is as stiff
David
03-07-2005 Over year old.
East Coast Tanics Senior Heliman Location: SOUTH DAYTONA FLORIDA
David
the biggest thing i notice doing it this way is it dont shred O rings it makes the head feel real free
Bobby
03-07-2005 Over year old.
rcman Veteran Location: Logan, Utah
Bobby, that makes sense, I just ordered some of those O-rings I am going to give it a shot
Thanks for letting us know
David
03-07-2005 Over year old.
lawrenmd Senior Heliman Location: Orlando FL.
Thanks Bobby
I'm gonna order me a set as well. I tried using a 1mm and a .5mm shim and I get a little vibration, this may be tracking but I had no time to check it.
Dave
03-07-2005 Over year old.
East Coast Tanics Senior Heliman Location: SOUTH DAYTONA FLORIDA
Dont think me think ERIC for sharing some good set up info
Bobby
03-07-2005 Over year old.
angelob Veteran Location: Harvard, IL
Does anyone have a part number for the 90 durometer o-rings?
Thanks,
Angelo
03-16-2005 Over year old.
MinAirChris Heliman Location: Sunny Florida
P/N 0844-6, they come 4 to a package.
Chris
Previously known as ChrisS
03-16-2005 Over year old.
I3DM rrProfessor Location: Israel
So is this the magic number ? 2x 90 O rings and one thick washer ?
also, whats the P\N for that washer ?
thanks.
Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco, Gaui www.liorzahavi.com
