BladeRunner
Elite Veteran
Location: Ontario Canada. Member of "some sort" s
| I have a set of 97mm MS tail blades on my R22 Ergo 50 / JR 5000T gyro. When in FFF the tail hunts like crazy!! If I put the plastic 87mm JR blades on it flys fine Gyro gain seems low.....35 in low 45 in high rate.
I did move the ball on the servo arm in closer to the center. I think it went from 20mm~16mm. I put the MS blades back on.........same problem, how much can I cut down the MS blades without ruining them?? I think they are just too much blade compared to the stock plastic??? BTW, I don't think MS has a smaller blade....but not sure..anyone know???? |
That's what was recommended to me.......the next size down is 80mm and that may be too small. The plastic JR's are 87mm and work fine. I will cut 5mm off the MS's and see if that works........
