rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 722 ONLINE 42 EVENTS SEARCH REGISTER  START HERE
 
15 pages [ <<    <     13      14     ( 15 )    >    >> ]16388 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
Avant Aurora - EFX - FX > I got my Avant this morning
 
 
IDHoverman
Senior Heliman
Location: Jakarta-Indonesia

Tail rotor rotation on Avant with torque tube

Has anyone observed that the torque tube application on Avant changed the tail rotor rotation direction? the standard Freya tail rotor rotates counter clockwise (seen from the right of the helicopter) whilst with the torque tube gear flip it rotates clockwise. Did I make a mistake here?

If not, how do you guys handle this? Simply flip the blade direction? Would I need to also flip the bladeholder installation so that the ball will also be at the trailing edge?
04-01-2005 Over year old.
 
 
Chopper
Key Veteran
Location: Stow, Ohio, oops, I mean St Louis, MO

The tail is on the right side of the machine. The tail blades always work the best going up into the rotor blade wash (the front or the tail rotor should go up and the back should go down.) What side the tail rotor is on is not extremely signifiacnt. There is a difference in the FAI roll characteristics.

The Avant tail is on the right side of the machine, and the tail blades rotate counterclockwise as wiewed from the right.

Paul
04-01-2005 Over year old.
 
 
I3DM
rrProfessor
Location: Israel

IDHoverman, both my Eagle WC and Freya WC use the same tube system (and gear) as on the Avant, and both rotate counter clockwide when looking from the right side, i would guess you are missing something.

Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco
www.liorzahavi.com
04-01-2005 Over year old.
HOMEPAGE  
 
 
Ray Nemovi
Veteran
Location: SAN DIEGO CA

you actually got it right. My avant with the torque tube rotates cockwise. there is no real difference in which way the tail rotates. I just flipped my blades and flipped the pitch slider ring per Augusto as well to get the right limits on your gyro and it seems to be working fine.

Ray N.
04-02-2005 Over year old.
 
 
Augusto
rrAdvertiser
Location: San Diego, CA

Actually it can be built on either side. It's just a matter of preference.

Since the downwash for somebody that flies mostly 3D is mostly from an inverted flying we decided to use it so that the downwash hit the blades when inverted.

It flies great as installed.

Augusto.

Avant Aurora Ultimate
04-02-2005 Over year old.
 
 
Igor Nack
Heliman
Location: Moscow, Russia

Tail case

Hi guys!
Can anybody explane me what tail case I must use with CF tail boom for my Avant with belt drive system?

Life's too short not to ...
04-02-2005 Over year old.
HOMEPAGE  
 
 
I3DM
rrProfessor
Location: Israel

Igor, Standard tail case (box) would work fine.

Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco
www.liorzahavi.com
04-02-2005 Over year old.
HOMEPAGE  
 
 
Igor Nack
Heliman
Location: Moscow, Russia

But for my opinion standart plastic case too small for CF tail boom. I tried to install standart case on my CF tail boom and found 2mm difference between two leafs of the tail case. Is it normal?

Life's too short not to ...
04-02-2005 Over year old.
HOMEPAGE  
 
 
I3DM
rrProfessor
Location: Israel

The CF boom is slightly larger diameter then the aluminum one, but the standard gearbox should work fine, Hirobo makes the twister which uses a CF boom and atandard gear box. i have never seen it in person so i dont know for sure, but its supposed to work.

why bother BTW ? whats wrong with the aluminum boom ?

Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco
www.liorzahavi.com
04-02-2005 Over year old.
HOMEPAGE  
 
 
bigglesbutler
Veteran
Location: Aberdeen, Scotland

Yeah im sticking with the ally one, no point wasting money of your going to push the limits and probably crash :P
OR you could get a quality one from Aeromoonniiiii whatever his name is :P. YES, yes I am being SARCASTIC, his stuff isnt worth stirring your paint with.



Si
04-02-2005 Over year old.
 
 
Garry-Boy
Key Veteran
Location: Moscow, Russia

You Scots don't understand that a heli should be light
Joking bro! Just Joking!
Garry.
04-02-2005 Over year old.
 
 
15 pages [ <<    <     13      14     ( 15 )    >    >> ]16388 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
Avant Aurora - EFX - FX > I got my Avant this morning
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, July 24 - 4:22 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie