hool
Heliman
Location: Moscow Mills, MO. USA
| I sure hope someone can give me an idea as to what happened.
I have over 2 hours of flight time on my Trex and last evening I was hovering in my basement and about 5 minutes into the flight the heli suddenly yawed left into the ground. I would not mind so much if it would have been my fault, but there was no rhyme or reason I could find. I picked it up and hooked a seperate power source to bypass the ESC and motor and all seemed fine! I have a Berg 6 rx with JR8103. The main blades are toast, but I can't really find anything else broken or bent. I will of course check further before attempting to fly again.
I was curious if this could be the cause. Last evening we were having electrical storms and, excuse my stupidity if this is the cause, but I have no idea if storms can cause interference like this.
I run in high gov with 0, 25, 100, 100, 100 throttle and 0 pitch at mid stick with -11 to +11 pitch range. I have not noticed any bogging and I thought all was good!
Please help
Brian
Trex 450X, Mega 16/15/3, CC35, 13T, GY401, 4xHS56, TP2100 |
