RunRyder - It's your own fault.

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 806 ONLINE 28 EVENTS SEARCH REGISTER START HERE

1 page

988 views

POST REPLY

GrandRC	.	CanoMod	.	Futaba-RC
	.		.

e-Align T-REX 450-500-600 > It's your own fault.

jack726
Veteran
Location: Cerritos California

It's your own fault. If you are going to leave all these good ideas laying around on this forem, you must expect someone to steal them.
Well after building several CCPM conversions, I decided to try to build one that was cheap, good and easy, so I stole all the great ideas, threw in a couple of my own. Here is my ultimate design (for me).
http://home.earthlink.net/~helicopters/ I would like to thank all I have borrowed from. I am sorry I can not remember my victims name, but you know who you are. Thanks Jack

01-09-2005 Over year old.

mapmanufacturer
Senior Heliman
Location: Bunker Hill, WV

Looks great

.
I saw in one of your pictures that your are using a GWS receiver make sure you use a peace of tape to hold the crystal in and to bend the legs out alittle on the crystal. I have had a crystal fall out on one of my planks and it ended up costing me a plane and electronics.

01-09-2005 Over year old.

HOMEPAGE

Enright13
Senior Heliman
Location: Nottingham, England

I'd ditch the glitchmeister completely and replace it with a better receiver. Those things aren't worth risking your heli for, especially such a nice one.

BCingU
En ];-)
"Oi! Who put THAT there?"

01-09-2005 Over year old.

bugsb
Veteran
Location: rothwell//northants UK

i agree i lost 2 planes with gws rx's
great looking setup
ron

01-09-2005 Over year old.

flytech
Veteran
Location: Sunland, CA

jack! you beat me to it! ;P

after reading all these ccpm threads, i was convinced too. playing around with the servo arrangements on a spare body, i came up with a design like yours. but then i thought about this one...

you'd shave the arms off of the original pitch/elev servo box (part of the frame that's screwed in) that would screw into the front area of the main mast (arrangement would be reverse of what you have now) almost just like 3De's kit but u use the mentioned orig servo box, trim (not completely remove) the front mast area. the 3rd servo would sit right above the tail drive gear behind the main mast, mounted in a manner your using (dremel frame for servo cavity, screw to frame w/spacers).

01-09-2005 Over year old.

HOMEPAGE

jack726
Veteran
Location: Cerritos California

Crystal

The first thing I did was solder the crystal in. I agree with you about the reciever. Will drop a Mini Jr or a Borgue in as soon as I can locate one.

Jack

01-09-2005 Over year old.

copperclad
Elite Veteran
Location: ..

hi
what do they say " imitation is the sinserest form of flattery "

i'm thinking i'll be trying to flatter them too in a few weeks

01-10-2005 Over year old.

HOMEPAGE

JariN
Heliman
Location: Turku,Finland

Look what I did on last week, also find an idea somewhere in RR,only did downside of swash myself

I have also same kind of problems with weather as Jack726,here in Finland also rains water or snow every day so only place to fly is my friends garage:

JariN

01-10-2005 Over year old.

HOMEPAGE

1 page

988 views

POST REPLY

A Main Hobbies	.	Boca Bearings	.	Modefo's RC Helicopters
	.		.

e-Align T-REX 450-500-600 > It's your own fault.

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic