rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 750 ONLINE 28 EVENTS SEARCH REGISTER  START HERE
 
1 page380 viewsPOST REPLY
Esprit Model . Thunder Power RC . Real Raptors

.
.
e-Align T-REX 450-500-600 > Stable feel @ -60% EXP
 
 
flytech
Veteran
Location: Sunland, CA

as an intermediate cp heli pilot/"mechanic":

i took the your suggestions to run -30% EXP on both ail/elev settings and have been flying this config for a while. i've been setting up my flight modes for 3d and decided to assign flight modes

#1 - hovering
#2 - fff
#3 - inverted flight (i never saw the fun in autos)

aside from this, i decided to try -60% EXP on both ail/elev on flight mode #2 and man.. it's like hopping into a luxury car with my newly found stability setting. i feel so much more confident sending it into high bank turns, i'm dropping elevation less, and really starting to smoothen out my banking plane (on this particular heli) now.

i'm really starting to like this bird!

wrt to this, setup is: eclipse7/berg5dsp/align9g+6g/gy240
12-29-2004 Over year old.
HOMEPAGE  
 
 
jzeller
Senior Heliman
Location: Victoria, MN - USA

What are you running for travel? Full travel or what %? I've just started setting it up but I'm finding the heli difficult to fly. It's either unstable or over-responsive compared to my other birds (Raptor60, Logo, Corona, HB2). I find I'm over-correcting continuously in all axis. I've tried backing off on pitch and headspeed but then it doesn't want to get off the ground. I've backed aileron/elevator travel down to 50% and am running 30% expo. I'll try 60% expo next...
12-29-2004 Over year old.
 
 
bugsb
Veteran
Location: rothwell//northants UK

have a look at trex tuning website
very helpfull
ron
12-30-2004 Over year old.
 
 
Tanner Hall
Senior Heliman
Location: Denver, CO

what's the address?
12-30-2004 Over year old.
 
 
Lowtech
Heliman
Location: Corona, California - US

I'll try -60% expo , sounds like it'll be smoother.
12-30-2004 Over year old.
 
 
flytech
Veteran
Location: Sunland, CA

Quote 
What are you running for travel? Full travel or what %?


elev: linkage @ position 3 from center of servo arm
ail: linkage @ position 2 from center of servo arm
ail-epa = elev-epa = 100%

Quote 
I've backed aileron/elevator travel down to 50% and am running 30% expo. I'll try 60% expo next...


make sure it's -30% expo not +30%expo (just to verify)

Quote 
what's the address?


http://homepage.ntlworld.com/ashley.davis/
12-30-2004 Over year old.
HOMEPAGE  
 
 
dnam
Veteran
Location: Herndon, VA - USA

If the heli feels too twitchy you should connect the aileron and elevator pushrods further in towards the center of the servo. Try the innermost hole. I have mine in the second hole from center and use 30% expo.
12-30-2004 Over year old.
HOMEPAGE  
 
 
1 page380 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
e-Align T-REX 450-500-600 > Stable feel @ -60% EXP
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, October 8 - 2:15 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie