rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 768 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page457 viewsPOST REPLY
HeliProz . ZoomsHobbies . HeliHobby

.
.
e-Align T-REX 250-450-500-600 > has anyone tried the mega power 400l yet
 
 
Rcbry
Senior Heliman
Location: USA

Hey guys, please post results if you've tried the mega power 400l

thanks
bryan
12-05-2004 Over year old.
 
 
Shun
Senior Heliman
Location: Houston, Tx

seems to have pretty good power, I am using the 11 tooth pinion that comes with the Trex450x kit! On my tp2100 after about 10 min. Motor was slightly warm but flew well in FF flight and a couple of circuits!
12-05-2004 Over year old.
 
 
11290
Senior Heliman
Location: USA

Will know more later this week when I get mine and try it.

Doesn't seem to be that many people using it yet. Interesting about the 11T pinion.

Somewhere there was a post several weeks ago that they were using a 13T and would need to go to a 15T to get it right. Time will tell.
12-06-2004 Over year old.
 
 
vetrider
Elite Veteran
Location: Daleville, AL (Ft.Rucker)

There is only one pinion that comes with the kit that fits the Mega 400L. That is the 11 tooth.
Mine does fine with the 1320 pack but I haven't got a full flight on it yet due to the CHEAP GWS RX I HAD in it causing a crash and I'm still away from home working while my BERG 6 channel RX is waiting for me at home.

More info HERE

Nolan Manley
RREMODELS, KBDDintl, Magnum Fuel
Stratus, ODIN, Knight3D, ATOM 500, TREX 700N.
12-06-2004 Over year old.
 
 
Rcbry
Senior Heliman
Location: USA

I've tried to find rpm per volt specs on the motor but haven't managed to find their website. Does anyone know it by chance? It would be nice to have the specs on it so we can calculate the correct pinion size.
12-06-2004 Over year old.
 
 
Rcbry
Senior Heliman
Location: USA

Shun, do you know what your headspeed is with the 11tooth?
12-06-2004 Over year old.
 
 
hpilotrc
Veteran
Location: NY--->>Mooresville, NC USA 8/2005

Mega 15 (400L)

I have tried it in a hover and would recommend going to a 8 or 9 tooth pinion.
I was getting 11 minutes for hovering.

Also I used governor high mode and these were my settings:

T-NR 0-35-35-35-35
T-I1 45-45-45-45-45

Of course these numbers would be much higher if I used a 8 or 9 tooth pinion. I will eventually tried to obtain one. I am looking for one with a set screw and not a pressed on one. Align has some coming out.

MIchael
12-06-2004 Over year old.
HOMEPAGE  
 
 
tindra
Senior Heliman
Location: Hofterup, Sweden

This is what Fung says about Red Mega Power 400L motor:
Temperature :MAX 200 Degree
Max RPM :80000
Output :250W
KV :3600
Shaft :2.3mm
Weight :72g
12-30-2004 Over year old.
HOMEPAGE  
 
 
mrNoodles
rrProfessor
Location: Borlänge, Sweden

Got one on order
12-30-2004 Over year old.
HOMEPAGE  
 
 
NIM
Veteran
Location: St Louis by six flags, Missouri

So is th 11 tooth pinion gear what I should use Im using cc 25 esc with tp 2100 with the red 400L. Its in the mail and Im awaiting arival of my kit.

NIM
12-30-2004 Over year old.
 
 
tindra
Senior Heliman
Location: Hofterup, Sweden

Well mrNoodles, then we both can look forward to test it!
Ekis
12-30-2004 Over year old.
HOMEPAGE  
 
 
Shun
Senior Heliman
Location: Houston, Tx

Im testing the 13 tooth pinion, it seems to have a little better headspeed than the 11 tooth. I will have a better read this weekend!
12-30-2004 Over year old.
 
 
1 page457 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
e-Align T-REX 250-450-500-600 > has anyone tried the mega power 400l yet
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, December 4 - 9:16 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie