heliman41
Key Veteran
Location: Valparaiso IN. USA
| PC of cake to use but remember its only for 30 sized mains anything 60 size wont hold straight. Take your balancer apart and slide the threaded rod thru both mainblade bolt holes then install the 2 wheels back on the rod with the cones facing inward, tighten firmly and evenly out from the ends then take 2 exact same type cans or wood blks or what ever you have on hand and place the ends of the rods on them 1 side will be heavy and droop, make that side overhang the table and just barely stick an edge of tracking tape on it , now just keep cutting pcs. off the end of the tape until the blades bal. evenly then apply the tape and your ready to track and fly. |
