RossoOz
Heliman
Location: Oz
| I'm having problems getting my 550 JR gyro to work in heading hold mode. I just can't seem to get it to stop from drifting. Ive tried adjusting the control rod, but every time it changes to a different setting required. I am using a JR 3810 TX and have the end points adjusted to 150%. I have tried different lengths on the servo control arm, but the problems still is the same. The only change is the rate of rotation at full stick. On the ground I am getting around half stick travel for full rudder movement. As per the instructions with the gyro. I am using the JR 810G servo for the tail.
The gyro works fine in the normal mode with very little dift.
Thanks for any help
Rosso |
