alanhsu
Key Veteran
Location: Vancouver, Canada
| If anybody use feigao brushless tail motor as a DD tail setup on a HB.
You tail rpm would be around 4100X11.1=45510rpm! at max tail throttle
However, on a shogun, the tail runs at a constant rpm at around 8000rpm. Hornet should have similar rpm as well.
8000 compared to 45000 is Very very different.
So I am just wondering why there is such a huge difference?
Can anybody explain?
I know that motor tail do not run at max throttle much, normally less than half that amount, but I would guess regular rpm of tail is around 20000rpm. Still significantly higher than 8000. |
