I am from Taipei, but there are hardly any more on runryder.
haha.
11-04-2004 Over year old.
Elbert78 Heliman Location: HsinChu, Taiwan
Hi , AlanHsu, and AllenKo, I am coming.....
11-04-2004 Over year old.
mickyteng Heliman Location: Taipei, Taiwan
I have come too ...
11-04-2004 Over year old.
phiber Heliman Location: Singapore
Hi guys,
Yo Elbert!
Nice test video! How did the test go and wat's the final verdict?
By viewing the videos, seems that some wagging of the tail is evident..
Is that due to the gyro or the 6g servo can't keep up with the gyro?
The align 6g servo is only 0.12s compare to the usual 0.10 or 0.09
(hs50) used for tail right?
so wat's the verdict on the RCE-400? Compared with gy240 and gy401?
The price n weight saver is a great incentive for the RCE-400!
Does the RCE-400 has remote gain selecting like the gy401?
My heli is enroute now from Taipei..
Shld reach me in 5 days' time i hope!! heehee..
11-04-2004 Over year old.
barret Heliman Location:
I 'm coming~~~~~~~~~~~~~~~~~~~~~~~~~~```
11-05-2004 Over year old.
Elbert78 Heliman Location: HsinChu, Taiwan
Hi Phiber: I take use of GWS pico F+ BB for tail servo which is only 0.09sec.
The wind is quite strong while testing, so the tail is good enough.
Here is another VCR for the Align GYRO.
http://www.align.com.tw/mpeg/RCE-400.WMV Of course there are the remotable sensitivity controlled on RCE-400.
Regards
Elbert
11-05-2004 Over year old.
phiber Heliman Location: Singapore
I see..
ok, thanks!
Elbert, U're running sbec at 6v?
On the gws webby, the pico +f bb is only stated as 0.12 at 4.8v and
0.10 at 6v..
I didn't get to see ur heli in the rce-400 video..
Seems that the heli in the video is using the align6g servo..
11-05-2004 Over year old.
Elbert78 Heliman Location: HsinChu, Taiwan
Hi :
My TREX is only for the 3D VCR, ther is no SBEC, the BEC is direct from the ESC with 11.1V input.
Yes, the gyro test flight VCR takes use of Align 6g servo.
Amazing........
Elbert
11-05-2004 Over year old.
allenko Heliman Location: Central mountain,Taiwan
Oh! Everybody has come....
While playing , can study knowledge!
11-05-2004 Over year old.
cslee Heliman Location: Penang
Hi,
Need some help from you guy.I'm new to RC world.Recently bough TREX 50x with GYRO 401 and 9CHPS Futaba transmitter. I have Align 6g servo for tail ? What is the best setting for my gyro ? My heli tail keep waging .
I have set my radio Gyro Sens as following :
Mix = INHT
RATE UP =100
RATE Down =100
Switch = B
But when I change the setting from Mix to ACT,tail no logner wag but the heli keep rotating and the GYRO LED keep blinking none stop.
