rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 771 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page326 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Ergo/Schweizer300 head dampners to CS dampner??
 
 
Ehab
Senior Heliman
Location: Beautifll San Jose, CA, Good old USA

I posted this in the scale forum but did not get help, may be you guys can comment

I am almost done with this semi scale S300/Ergo60. I have a Vigor CS head dampers I was going to install in the Ergo 60 head instead of the stock ones. I am using 680mm CF blades and 97mm SAB blades. This is a belt system. I am also using the stock paddles and weights. I am looking for stable hover and scale flying with some stall turns. I would appreciate your comments and experience!!
06-23-2002 Over year old.
 
 
cgbole
Veteran
Location: tulsa ok

dampeners

hi are you talking about the o-ring dampener up grade or stock dampeners, really either way i put the o-ring upgrade on my ergo
before i sold it it fit just fine i think they use the same spindle and hub as the ergo 60 you can check out the part numbers on horizon's web site hope this helps
chuck
06-23-2002 Over year old.
 
 
estevens
Senior Heliman
Location: Phoenix, Arizona

The O ring upgrade does fit the Ergo 60, in fact the only major difference between vigor grips and ergo grips is the offset on the arms. I did find with the hard dampners that the head speed needed to be kept up to prevent any lowspeed oscillations.

Eric
06-24-2002 Over year old.
 
 
Ehab
Senior Heliman
Location: Beautifll San Jose, CA, Good old USA

Thx guys. I am talking about the STOCK dampers from the Ergo 60 and the Vigor CS. I'll try the CS ones first and see!!!
06-25-2002 Over year old.
 
 
1 page326 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Ergo/Schweizer300 head dampners to CS dampner??
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, December 4 - 9:03 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie