RunRyder - JR G550T Setup on a JR3810 (8310)

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 613 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

217 views

POST REPLY

3D Heli Depot	.	JR-Spektrum	.	Gyro Hobbies
	.		.

Radio - Servo - Gyro - Gov - Batt > JR G550T Setup on a JR3810 (8310)

mrNoodles
rrProfessor
Location: Borlänge, Sweden

Hi all

Im seeking advice on how ro setup my G550T+810G for the best performance. Im using a JR3810, and the heli is a Cal30.

Im using a QuickUK half long servo arm on my tail servo, it has 3 holes (8, 13, 18mm) The 550 manual says to put the pushrod 16mm from center. Should I start with the 18mm and try? At the moment its in 13mm hole, and it drifts some..

And I really dont get the part with ATV, trims etc. Is it oki to trim in norm. mode? As long as theyre centered in HH mode?

(I now that some really tried to help me, but I need more info!!)

Thx in advance!!

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

05-29-2002 Over year old.

HOMEPAGE

Brian Bennett
Key Veteran
Location: Dugway/Tooele UT, USA

Pasta Man,

I wasn't sure if you saw my post on the setup notes for the G550T when you were asking about the gyro as product to buy. I posted my response fairly late.

Link here:

http://runryder.com/showtopic.htm?t...6&topicid=11568

Post any other questions, or you can email me directly for help. Most importantly, make sure your heli is absolutely balanced with no vibration. The latest generation of gyros are quite sensitive compared to the first piezo or last mechanical units. You will realize their full potential only if the heli is way smooth - this is probably common sense to you.

-gi

05-29-2002 Over year old.

HOMEPAGE

1 page

217 views

POST REPLY

E-flite	.	Next D	.	Fast Lad Performance
	.		.

Radio - Servo - Gyro - Gov - Batt > JR G550T Setup on a JR3810 (8310)

PRINT TOPIC

Advertisers

Subscribe to This Topic