rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 467 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page341 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
Radio - Servo - Gyro - Gov - Batt > Faulty Futaba FF9
 
 
Peter G
Senior Heliman
Location: Runcorn, Cheshire, UK

Received a new FF9 2 days ago and spent ages transfering info from my old FF8, only to find I am not transmiiting a signal.ie:The RF signal light would not light. (Yes I did have a crystal in)
Anyway after speaking to Futaba in the UK, they concluded it was a faulty set. So I phoned the shop were I bought it, only to be told he had no other TX,s in stock. I have had to send it back to Futaba in the UK.I just wondered if anybody else out there has had the same trouble, If you have post a response as it could well be a common fault that Futaba should be told about.
Thanks for being patient on a boring topic.
Although a important one.
( no signal bye bye heli)
Peter G
05-17-2002 Over year old.
HOMEPAGE  
 
 
fossy
Heliman
Location: Styria/Austria

Faulty Futaba FF9

You could try the module of your old FF8 on the FF9. I think, only the new module is bad and it is easier to send only that to service!!

Chris
05-19-2002 Over year old.
 
 
AMCross
Senior Heliman
Location: champaign IL

Peter,
I concur. Try removing your module and use your module in your FF8, see if hte FF8 operates properly. Now try the FF8 module in the FF9.

Lastly, the module may just not be seated properly in the FF9; if it works fine in the FF8, try removing it and reinstalling it being careful to get all 4 corners locked in tight.
05-28-2002 Over year old.
 
 
1 page341 viewsPOST REPLY
GrandRC . CanoMod . Futaba-RC

.
.
Radio - Servo - Gyro - Gov - Batt > Faulty Futaba FF9
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 12:49 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie