ImRich Veteran Location: Derry, NH USA
| Well.. here are the switches, but hard to do in text:
In this table, 1 = On, 0 = Off
CH1 = 0, 0
CH2 = 0, 1
CH3 = 1, 0
CH4 = 1, 1
The TX is only 4 channels, but the RX is eight so do not use the third switch on the receiver (leave it down).
If I remember correctly the receiver may be opposite from the transmitter. For example for channel 2 you may have 0, 1 on the TX but 1, 0 on the receiver.
Just flip the switches until the reception is clear.
--- Rich |