RunRyder - 9z/9c and reciever compatability?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 301 ONLINE 25 EVENTS SEARCH REGISTER START HERE

1 page

273 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

Radio - Servo - Gyro - Gov - Batt > 9z/9c and reciever compatability?

driftrider
Veteran
Location: Cedar Rapids, IA. (In my own little world)

Hello everyone,

Are either the Futaba 9z or 9c radios compatable with other brands recievers?

The reason why I ask is the I have a RD6000 and it allows the PPM modulation to be switched so that it can operate any RX, and I want to upgrade to either the 9Z/9C sometime in the future but I'd like to be able to use the recievers I currently have (none of which are Futaba).

Thanks,

Mike

05-12-2002 Over year old.

Hughes500Pilot
Key Veteran
Location: Anaheim, CA

Out Of Luck

Sorry, but you are out of luck. Futaba uses a negative shift system (so does Hitec). Airtronics and JR use a positive shift system. JR receivers will not work with Futaba. -Steve

05-12-2002 Over year old.

driftrider
Veteran
Location: Cedar Rapids, IA. (In my own little world)

I guess that gives me a good reason to upgrade my recievers too!

Just don't tell my wife!

Mike

05-12-2002 Over year old.

SJN
Senior Heliman
Location: Denmark EKCH

I have a 9C and use it with my Multiplex , Jeti and Graupner recievers. Havn`t had a problem yet. Just make sure you get a Multiplex crystal for the multplex reciever or a Graupner crystal for the Graupner reciever ect.

I have only tried them in PPM mode........if that does any difference.

05-12-2002 Over year old.

SJN
Senior Heliman
Location: Denmark EKCH

Sorry for misleadng you.......

SJ

05-13-2002 Over year old.

1 page

273 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	PowerHelis
	.		.

Radio - Servo - Gyro - Gov - Batt > 9z/9c and reciever compatability?

PRINT TOPIC

Advertisers

Subscribe to This Topic