rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 677 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page585 viewsPOST REPLY
HeliProz . ZoomsHobbies . HeliHobby

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > The New Venture 30
 
 
Lift
Elite Veteran
Location: Houston, TX

Guys & Gals,

Well I now have close to 2 gallons through this bird and I would like to add that it is an EXCELLENT little chopper. For those of you that want to bash and thrash a low cost heli then you really need to consider the new Venture 30 among your choices. You don't need a bearing upgrade or this or that add-on. She is ready to go.

I do think that it is slightly lower in the power to weight ratio compared to a Raptor 30 but not by much. FFF is a little faster than the Raptor and it rolls REAL fast. With the kit coming with 2 different options for cyclic tuning you can really grow with into the heli.

A 50 conversion would make this thing the bomb and I am getting the parts sourced soon.

Here is my setup:
Radio:
Swashplate - JR531s(std servos would be just fine. Just make sure they are BB supported)
Rudder - GY401/9253
Throttle - Hitec 525
2700 NIMH 4.8v battery AA Size

Power:
OS .32 SX-H on 30% CP juice, OS#8 plugs
Ace Upgrade Muffer( not best choice for 9.78:1 ratio. To long of an expansion champer. Try Hatorri)

Blades:
Main - SAB 550 CF (excellent as usual)
Tail - NHP 85mm (moderate improvment over stock so far)

Other:
CF Dual boom supports ( lighter and can reach glow plug without remote glow setup)
T&T Header Tank

Anybody else care to add?

//Payton
05-10-2002 Over year old.
 
 
Helimike
Senior Heliman
Location: Raymore Missouri USA

Venture 30

I bought one in March and have been flying it day after day, it is nice.
Only a few bugs to work out.

The pinion gear needs to be glued in the iner race of the bearing. Mine came louse and started chewing up the gear.JB weld fix .

The top of main gerar rubs on the frames. I installed a washer between bearing and main gear hub.

The single boom support works fine. I want a little more power on low nitro (5%-10%)
I hear Rossi is coming out with a 30 size engin, anyone have any info?

Michael

K.I.S.S.
05-10-2002 Over year old.
 
 
1 page585 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > The New Venture 30
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 3:54 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie