RunRyder - Voyager 50 metal fan

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 606 ONLINE 19 EVENTS SEARCH REGISTER START HERE

2 pages [ << < 1 ( 2 ) > >> ]

1333 views

POST REPLY

Ron’s HeliProz South	.	Century Helicopter	.	MTA Hobbies
	.		.

JR Heli Vibe - Airskipper - Sylphide - Venture > Voyager 50 metal fan

Carps
Veteran
Location: Caterham, Surrey, England

Part numbers

Fan - KS762
Control arms - JR60546 (*2), JR60547, JR60548, JR60549
Front pulley - JR60322
Rear pulley - JR60323
Air filter - JR60779
Double lever tail slider - KS689
JR tail slider - JR60340
Main shaft double bearing blocks - JR60466
Vertical carbon fin - JR60794
Horizontal carbon fin and mount - KS566
Boom brace clamp - JR60398

For the elevator control upgrade you will also need a 15mm*2.3mm threaded control rod, and a JR universal ball link.

I got all my parts from Stephen at CyberHeli. He had not heard of the control arm upgrade part numbers before, but still managed to get them to me within a couple of weeks !

Carps.

06-19-2002 Over year old.

HOMEPAGE

BadHabit
Heliman
Location: Atlanta, GA

Carps,

Thanks for the part numbers. I tried to find a picture of the control arm parts but can't find a picture anywhere. Do you have a close-up of the control arms upgrades that you can share?

06-20-2002 Over year old.

rickc
Elite Veteran
Location: Creve Coeur IL. (Peoria Area)

I like this addition, I may do this myself.

Rick

[IMG]http://www.horizonhobby.com/products/description.asp?prod=JRP960340&pc=JRP960340[/IMG]

06-20-2002 Over year old.

HOMEPAGE

Carps
Veteran
Location: Caterham, Surrey, England

I will will sort some pictures of the control arms tonight

And a new close up of my tail with the carbon fins and HG clamps and mounts (Vertical carbon fin - JR60794, Horizontal carbon fin and mount - KS566).

Had a bit of a catastrophe when putting the protective braid on my servo wires last night

Managed to catch the SX8000G tail servo wire and cut it through one of the wires

Very careless

I knew I should have left it alone last night as I was v.tired but I was imagining myself in the hover for the first time at the weekend... Now I need to get a new servo lead (which is unique to that servo) and pull apart a brand new servo. Doh !

06-20-2002 Over year old.

HOMEPAGE

rickc
Elite Veteran
Location: Creve Coeur IL. (Peoria Area)

That's a 4 wire lead I heard. Putting that braid over the wire is a real trick. I just bought 15 foot and found I needed to invent a system for it. Nothing is easy. :-)

Rick

06-20-2002 Over year old.

HOMEPAGE

BadHabit
Heliman
Location: Atlanta, GA

Carps,

Where did you find the information for the updated parts that you used?

06-25-2002 Over year old.

Carps
Veteran
Location: Caterham, Surrey, England

The part numbers can [nearly] all be found in the instruction manual. If you look through the various stages, there is quite often some footnote (in Japanese) which lists some part numbers in English. A lot of these are prefixed with the letters 'HG' - JR talk for upgrade (High Grade).
The thing you need to take notice of though is the quantity required and this will leave you working it out - for example, 2 main bearing blocks, 2 cyclic control levers. The quantities are all obvious when you think about it.

The fins I just asked Stephen at CyberHeli and he sorted those.

Carps.

06-25-2002 Over year old.

HOMEPAGE

BadHabit
Heliman
Location: Atlanta, GA

Thanks for the information Carps. I never saw that information in the manual as I didn't pay much attention to the writing since it was in Japanese which I can't read. Aleady have the Carbon fin set and they look great.

06-25-2002 Over year old.

2 pages [ << < 1 ( 2 ) > >> ]

1333 views

POST REPLY

Model Rectifier Corp	.	Heli Wholesaler	.	3D Heli Depot
	.		.

JR Heli Vibe - Airskipper - Sylphide - Venture > Voyager 50 metal fan

PRINT TOPIC

Advertisers

Subscribe to This Topic