heliman41
Key Veteran
Location: Valparaiso IN. USA
| The main needle valve provisional setting is: 1.5 turns out, the idle needle is a different story. It can accidently be screwed out too far rendering all adjustments stopped until the carb is removed and viewed thru the intake and had the idlebar setup back to factory settings.The mixture control valve and the nozzle must be centered within the throttle carb opening. Then after the eng is at running temp only then do you adjust slowly rich or lean to get a nice idle, a bit on the rich side is what you want otherwise the eng will speedup in decents causing the waa,waas etc....... |
