RunRyder - Missing 0103's Fury Extreme tail

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 305 ONLINE 25 EVENTS SEARCH REGISTER START HERE

1 page

352 views

POST REPLY

PowerHelis	.	Heli Wholesaler	.	3D Heli Depot
	.		.

Miniature Aircraft Nitro/Gas Helicopters > Missing 0103's Fury Extreme tail

gforce
Veteran
Location: Jacksonville FL

My kit is missing the 0103's on the tail blade mounts, and in the instructions it does not have them either. Section 10-A refers to them being installed in a previous step, but no previous step has them. They do show on the picture though. Anybody have the same problem? Sent email to MA but have not heard from them yet.

05-09-2002 Over year old.

HONDO
Heliman
Location: Tucson Az.

The Fury Extreme does not use the balls on the tail blade grips. The new pitch assembly does not use them. The pitch arms bolt directly to the blade grips thru the bearings.
David you might want to check if you have the new Extreme slider assembly because there is no were to put the balls on that assembly.
The Fury 60's use them.

05-09-2002 Over year old.

HOMEPAGE

HONDO
Heliman
Location: Tucson Az.

David I just want gforce to know that those balls are not needed on the Extreme kit. I wasn't sure if you had the correct slider if yous had the balls on it.
Both Extremes I built did not have any instructions because they were both prototypes. But they are the kind of the same as the SE tail.

05-10-2002 Over year old.

HOMEPAGE

gforce
Veteran
Location: Jacksonville FL

O.K - I see it now. Drawing 10A (in my manual) shows the 0103's.
In drawing 10D the drawings show the 0049 2x10 socket bolts going through the 0859-16 pitch links with bearings, instead of the 0103's.
Thanks guys!

05-10-2002 Over year old.

1 page

352 views

POST REPLY

JR-Spektrum	.	Gyro Hobbies	.	E-flite
	.		.

Miniature Aircraft Nitro/Gas Helicopters > Missing 0103's Fury Extreme tail

PRINT TOPIC

Advertisers

Subscribe to This Topic