rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 570 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page365 viewsPOST REPLY
Thunder Power RC . Mikado Modellhubschrauber . GrandRC

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Problem installing an OS 50 Into An Ergo 46
 
 
Lwnemesis
Senior Heliman
Location: Seattle, WA

I cant fit the OS 50 into the Ergo 46. The clutch goes to far into the clutch bell. Do I need to elongate the engine mount frame holes? Also The engine is a bitch to get into the engine mount, i just hope it doesnt crack (the mount that is). I cut the crankshaft down (cried while doing it). Fitted the 10 tooth clutch bell, got the bigger tank. Just need to get the Engine problem figured out I can finally fly again.

HELP Please.
05-09-2002 Over year old.
HOMEPAGE  
 
 
estevens
Senior Heliman
Location: Phoenix, Arizona

Are you using the correct holes in the engine mount? There are two sets of motor mount holes depending on what engine you use. If you mount the engine in the mount with the wrong set I believe it will set up two high in the frames.

Eric in Phoenix
05-10-2002 Over year old.
 
 
Deja_Vu
Senior Heliman
Location: Salt Lake City, Utah

I had this problem too. The holes that line up on the .50 mount are slightly offset (at least on my mount they were.) All I had to do was flip the mount over and it fit.
05-10-2002 Over year old.
 
 
Lwnemesis
Senior Heliman
Location: Seattle, WA

hmm didnt even think of flipping the motor mount. will try, thanks
05-10-2002 Over year old.
HOMEPAGE  
 
 
1 page365 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Problem installing an OS 50 Into An Ergo 46
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 2:03 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie