rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 308 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page706 viewsPOST REPLY
GrandRC . CanoMod . Futaba-RC

.
.
e-Zoom, Shogun, Dolphin > ZOOM and a 9C
 
 
crazhorse
Senior Heliman
Location: texas

Hooking up the electronics on my zoom, with the swash set to swash1 with all servos connected the pitch servo i connected to channel 6 doesnt move at all when throttle is applied. Anybody have a idea as to what i'm missing in my setup ?
04-27-2004 Over year old.
 
 
rerazor
Elite Veteran
Location: Mich.

Pitch channel 5??
04-27-2004 Over year old.
 
 
crazhorse
Senior Heliman
Location: texas

from what i got from the 9c manual it went to ch 6 ?
04-27-2004 Over year old.
 
 
JohnM
Senior Heliman
Location: Providence, RI - USA

What RX are you using?
Pitch should be channel 6.
Check the "Servo" option under the main heli options on the 9C. It gives you a graphical display of the servo movement.
Also try one of the other CCPM heli modes and see if all the servos move.
04-27-2004 Over year old.
 
 
crazhorse
Senior Heliman
Location: texas

I checked it today at lunch, the swash 1 defaults to a pitch curve of 0s all the way across..........
04-27-2004 Over year old.
 
 
1 page706 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
e-Zoom, Shogun, Dolphin > ZOOM and a 9C
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, January 9 - 10:13 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie