RunRyder - Another gv-1 and 9CHP question

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 299 ONLINE 25 EVENTS SEARCH REGISTER START HERE

1 page

353 views

POST REPLY

Model Rectifier Corp	.	PowerHelis	.	Heli Wholesaler
	.		.

Radio - Servo - Gyro - Gov - Batt > Another gv-1 and 9CHP question

offspring47
Heliman
Location: North Olmsted, Ohio (Cleveland)

Can someone please tell me if it is possible to use the C switch and the Vr (b) knob to control the speed. I can use them separately but not at the same time. And if I can only use them separately with the other one inh., then how do I setup the on/off using the d switch when I am using the vr (b) knob to control the speed. I have set the d switch to be the on/off in the govenor screen with the C switch controlling speed, but if I Inh. it to use the knob then I Inh. the D switch as well. Hope I am making sense, my brain hurts from trying to figure out all this heli stuff. Thanks.

Kevin

05-07-2002 Over year old.

azfaith
Heliman
Location: Las Vegas

GV-1 and 9C mixing

As I stated in your last post. I set mine up as follows: On/Off on sw B;three head speeds set up on sw C;rpm adj on vr B. The effect of this is: sw C pos one 1380-1550rpm,pos two 1550-1750rpm,pos three 1750-1920. If you do not know how to set up the p-mix I can write more detailed info?

05-07-2002 Over year old.

offspring47
Heliman
Location: North Olmsted, Ohio (Cleveland)

Yes, please more info needed on setting up the p-mix. I want to use the exact same setup you have with one change. I would like to use the d switch to control the on/off rather than the b switch. thanks.

Kevin

05-07-2002 Over year old.

azfaith
Heliman
Location: Las Vegas

9C set up

Here it is the way I have it set up menu by menu. I am no expert so if you want to change sw or ch you'll have to figure it out.
AUX-CH: ch7 sw-c,ch8-vr-b,ch9-sw-b, norm
Governor: (ACT),Rate-Up 10%,cntr 50%,Down 90% SW-c
Prog Mix1: (On),(vrb>aux1),Rate +40%
Prog Mix1 (screen2): Mix-on,Mas-vrb,Slv-aux1,Link-off,Sw-b,Posi-null
Note not all the p-mix modes have the same options. I think pmix 1&2 are the same but not sure?

05-08-2002 Over year old.

AMCross
Senior Heliman
Location: champaign IL

AZ,
Pmixes 1-5 are all the same -- linear mixes. Mixes 6 and 7 are curves.

05-14-2002 Over year old.

1 page

353 views

POST REPLY

3D Heli Depot	.	JR-Spektrum	.	Gyro Hobbies
	.		.

Radio - Servo - Gyro - Gov - Batt > Another gv-1 and 9CHP question

PRINT TOPIC

Advertisers

Subscribe to This Topic